{"product_id":"reve-d-rdx-rear-a-arm-conversion-set-d1-rac","title":"Reve D RDX Rear A-arm Conversion set D1-RAC","description":"\u003cp\u003eThis rear A-arm conversion set for the RDX delivers outstanding cornering and traction!\u003c\/p\u003e\n\u003cp\u003eConverting your RDX’s rear suspension to A-arms allows you to freely adjust vehicle width, camber angle, caster angle, roll center, and even toe angle change over bumps, greatly expanding your setup options. You\u003c\/p\u003e\n\u003cp\u003ecan freely control the kick, build-up, and launch when exiting corners, as well as quick throttle control during drifts. This allows for flexible setup to suit road conditions, layout, and driving style.\u003c\/p\u003e\n\u003cp\u003eThe initial settings are based on a basic set developed by Team Rêve D’s TAKAHIRO, along with Kiyoshi Tayu and Hodaka Ishijima, who have been using A-arms in testing and competitive events for many years, to deliver stable performance in a variety of situations. Try out this\u003c\/p\u003e\n\u003cp\u003erear A-arm conversion set to further enhance your RDX’s driving performance!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eKits Contents:\u003c\/p\u003e\n\u003cp\u003eAluminum rear lower arms (2 pieces)\u003c\/p\u003e\n\u003cp\u003eAluminum rear lower arm plates (2 pieces)\u003c\/p\u003e\n\u003cp\u003eAluminum rear upper arms (with built-in ball bearings, 1 each on the left and right)\u003c\/p\u003e\n\u003cp\u003eAluminum rear knuckles (1 each on the left and right)\u003c\/p\u003e\n\u003cp\u003eAluminum rear knuckle plates (2 pieces)\u003c\/p\u003e\n\u003cp\u003eAluminum suspension mount RF type #3 (1 piece)\u003c\/p\u003e\n\u003cp\u003eAluminum suspension mount #3 (1 piece)\u003c\/p\u003e\n\u003cp\u003eAluminum suspension mount spacer (1.0mm thick x 1 piece)\u003c\/p\u003e\n\u003cp\u003eAluminum rear caliper plates (2 pieces)\u003c\/p\u003e\n\u003cp\u003eAluminum bearing spacers (2 pieces)\u003c\/p\u003e\n\u003cp\u003eGraphite rear shock tower for RDX (1 piece)\u003c\/p\u003e\n\u003cp\u003eIron spool cups for RDX (2 pieces)\u003c\/p\u003e\n\u003cp\u003eUpper arm pins (2 pieces)\u003c\/p\u003e\n\u003cp\u003ePOM spacers (0.5mm thick x 4 pieces, 1.0mm thick x 4 pieces, 2.0mm thick x 2 pieces)\u003c\/p\u003e\n\u003cp\u003eThin aluminum M3 Nylon nuts (2 pcs)\u003c\/p\u003e\n\u003cp\u003e aluminum spacers (Φ3 x Φ6 x 2.0 mm, 4 pcs)\u003c\/p\u003e\n\u003cp\u003e aluminum spacers (Φ3 x Φ6 x 3.0 mm, 4 pcs)\u003c\/p\u003e\n\u003cp\u003e steel turnbuckles for RAC M3 \/ M4 (20 mm x 2 pcs)\u003c\/p\u003e\n\u003cp\u003e steel rod end balls (M x 2 pcs)\u003c\/p\u003e\n\u003cp\u003e steel rod end balls (S x 8 pcs)\u003c\/p\u003e\n\u003cp\u003e steel M3 x 6 mm flat head screws (2 pcs)\u003c\/p\u003e\n\u003cp\u003e steel M3 x 8 mm flat head screws (2 pcs)\u003c\/p\u003e\n\u003cp\u003e steel M3 x 6 mm button head screws (2 pcs)\u003c\/p\u003e\n\u003cp\u003e steel M2 x 5 mm cap screws (6 pcs)\u003c\/p\u003e\n\u003cp\u003e steel M2 x 8 mm cap screws (4 pcs)\u003c\/p\u003e\n\u003cp\u003e steel M3 x 15 mm set screws (2 pcs)\u003c\/p\u003e\n\u003cp\u003e plastic ball cap (1 pc)\u003c\/p\u003e\n\u003cp\u003e plastic suspension mount bushings (2 pcs)\u003c\/p\u003e\n\u003cp\u003e assembly instructions \/ exploded view (1 sheet)\u003c\/p\u003e\n\u003cp\u003e parts list (1 sheet)\u003c\/p\u003e\n\u003cp\u003e MEIHO parts case\u003c\/p\u003e\n\u003cp\u003eIntroducing a new rear A-arm conversion set for the RDX that delivers outstanding cornering performance and traction!\u003c\/p\u003e\n\u003cp\u003eBy converting the RDX’s rear suspension to A-arms, you can freely adjust the vehicle width, camber angle, caster angle, roll center, and even toe angle change when over bumps, greatly expanding your setup flexibility.\u003c\/p\u003e\n\u003cp\u003eYou can freely control the kick feeling, charge, and release when turning out of corners, and you can also quickly accelerate with throttle control while drifting, allowing you to flexibly adjust the settings to suit the road surface conditions, layout, and driving style.\u003c\/p\u003e\n\u003cp\u003eThe initial setting values are based on a basic set developed by Team Rêve D’s TAKAHIRO, along with Akira Tayui and Hodaka Ishijima, who have been using A-arms in tests and competitive events for many years, in order to deliver stable performance in a variety of situations.\u003c\/p\u003e\n\u003cp\u003ePlease try this rear A-arm conversion set to further enhance the driving performance of your RDX!\u003c\/p\u003e","brand":"asbo-rc","offers":[{"title":"Default Title","offer_id":55525456937336,"sku":null,"price":224.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0395\/5743\/1459\/files\/rn-image_picker_lib_temp_a81a52dc-3efd-47c7-b506-c5660627655a.jpg?v=1775740762","url":"https:\/\/www.asborc.com\/products\/reve-d-rdx-rear-a-arm-conversion-set-d1-rac","provider":"asbo-rc","version":"1.0","type":"link"}